DigitaLinx HDMI Wall Plate Extension Set

Series: DigitaLinx

Model: DL-HD50C-WPKT-W

Transmitter in a Single Gang Wallplate, RX box format
Uncompressed 1080P/60Hz up to 50 meters over Cat5e or above
HDMI 1.3b and HDCP compliance
Wall plate powered remotely by receiver
Extension of HDMI/DVI signals

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Decora Wall Plate HDMI 50 meter 1080P extension set with remote power. This product consists of an HDMI wall plate transmitter and a CAT receiver. The CAT output can extend 1080P signal up to 164ft / 50 meters via a single CAT6/6a cable. It supports Power Over Cable (POC) function that allows for greater flexibility in installations.

Transmitter in a Single Gang Wallplate, RX box format
Uncompressed 1080P/60Hz up to 50 meters over Cat5e or above
HDMI 1.3b and HDCP compliance
Wall plate powered remotely by receiver
Extension of HDMI/DVI signals
Plenum longer distance HDMI/DVI Extension
Small space issues where TWP can be run but not HDMI
Package Contents:
1 x HDMI Wall Plate Transmitter
1 x Digitalinx DL-HD50C-WPKT-W Receiver
1 x Cover Plate
1 x 12V/1A Power Supply with multi country standard adapters
1 x User Manual

Extender Type - HDMI
HDBaseT - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Transmission Range: 164.04 ft
Active Power: 2.52 Watt
DC Voltage: 12 Volts
Color: White/Black
HDMI Compliance: HDMI 1.3
HDCP Compliance: HDCP 1.4
Video Bandwidth: 4.85 Gbps
Video Resolution: 480P60~1920x1080 at 60Hz
HDMI Audio Formats: PCM2.0/5.1/7.1CH, Dolby Digital, Dolby True HD, DTS
ESD Protection: Human-body Model: ±8kV (Air-gap discharge), ±4kV (Contact discharge)
Transmitter: Input: 1×HDMI Type A [19-pin female], Output: 1×RJ45 [HDBaseT]
Receiver: Input: 1×RJ45 [CAT], Output: 1×HDMI Type A [19-pin female]
Housing: Transmitter: Plastic-Front Panel, Metal-Rear Case, Receiver: Metal
Power Supply: Transmitter: Powered by the receiver through POC function
Relative Humidity: 20~90% RH (non-condensing)
Dimensions: Transmitter: 103.5mm(W) × 46mm(D) × 28mm(H); Receiver: 79.5mm(W) × 68mm(D) × 16.5mm(H)
Weight: Transmitter: 104g, Receiver: 133g

Extender 2758270 kb - Instructions

Project List