J-Box Integration Module with Standalone Timeclock for Zum Lighting Control

Model: ZUMLINK-JBOX-IO

Zum® wired junctionbox mounted multi-purpose integration and timeclock device
Powered by Zum linkbus
Provides a standaloneastronomical time clock and local time and date settings without a ZUM-HUB4 orcontrol system
Provides adistributed, room level interface to third-party smart controllers, such asHVAC/VAV systems and shade controllers
Supports in-roomdevice daisy chaining with other Zum wired devices

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ZUMLINK-JBOX-IO is a compact, multi-purpose, standalone integration and timeclock device that applies schedules, events, and common integration protocols to a Zum space without the need for a control system. As a Zum Wired device, the ZUMLINK-JBOX-IO can be discovered by the Zum app for easy configuration without custom programming. If needed, the ZUMLINK-JBOX-IO can also connect to a Crestron control system. The ZUMLINK-JBOX-IO mounts to a standard 4 in. square junction box, provides two Zum Link serial bus RJ-45 ports, an RS-232 port, an RS-485 port, two dry contact closure outputs, two low-voltage inputs, and two low-voltage inputs with LED indicator light support. The ZUMLINK-JBOX-IO supports in-room device daisy chaining to any 24VDC Zum Link run.

Zum Link Wired Technology

Zum Link technology enables in-room lighting control through keypads and sensors wired to controllers. Zum Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold separately) to RJ-45 ports to provide simple daisy-chaining and lighting control of compatible loads. The Zum Wired devices work together in a local ecosystem to provide customized solutions using the Zum app.

Easy Installation

The ZUMLINK-JBOX-IO installs in a standard four-inch square junction box. Depending on the installation requirements of the space, the ZUMLINK-JBOX-IO can be installed with the connections facing out or into the junction box. Connect the ZUMLINK-JBOX-IO to Zum devices (load controllers, keypads, and sensors) utilizing Zum Link connections.

Astronomical Time-Clock Control

Enables control of standalone Zum spaces based on date and time without the need for system networking or a centralized control hub. Configure date and time, schedules, events, and holidays from the Zum app directly to the space.

Zum® wired junctionbox mounted multi-purpose integration and timeclock device
Powered by Zum linkbus
Provides a standaloneastronomical time clock and local time and date settings without a ZUM-HUB4 orcontrol system
Provides adistributed, room level interface to third-party smart controllers, such asHVAC/VAV systems and shade controllers
Supports in-roomdevice daisy chaining with other Zum wired devices
Cover mount to a standard 4 in. square junction box

Systems Controlled - Lighting
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: cUL, FCC, IC, UL
Depth: 0.99 in
Height: 4.16 in
Width: 4.16 in
Product Weight: 0.38 lbs
Color: White
Zum Link Power Bus Requirements:
•Max Current Consumption: 110Ma
•Max Keypad Feedback LED Current: 20mA, Passthrough from Zum Link bus
Wired Communications:
•ZUMLINK: (2) RJ-45 ports; In-room Zum Link device daisy-chaining
Controls and Indicators:
•SETUP: (2) Pushbutton and (1) green LED; Indicates On/Off status of connected load; Lights briefly to indicate a button press
•PWR: (2) Bi-color LED; Power indicator; Turns red when power is first applied for approximately 0.5 seconds and then turns green
•ZUMLINK: (2) Green LED; LED lights green in normal operation
•CLOCK: (2) Green LED indicates when: A unit is part of a Zum Link network; The time and location have been set; One or more timeclock events have been configured; The LED blinks for 0.5 seconds on/off when timeclock is in manual or maintained override
Connections:
•C, NO, NC RELAY: (2) 3-pin terminal blocks for output relays; 30VAC/VDC 1A; Each terminal accepts one 20-24 AWG wire
•V+, IN, LED IN: (2) 3-pin terminal blocks for input relays with keyswitch LED support: Each terminal accepts one 20-24 AWG wire
•V+, N IN: (2) 2-pin terminal blocks for input relays without keyswitch support; Each terminal accepts one 20-24 AWG wire
•RS-232 COM1: (1) 5-pin terminals block; G, TX, RX, RTS, CTS; Each terminal accepts one 20-24 AWG wire
•RS-485 COM2: (1) 3-pin terminal block; G, D+, D-; Each terminal accepts one 20-24 AWG wire
Humidity: 10% to 90% RH (noncondensing)
Heat Dissipation: 6 BTU/hr

Module 5352764 kb - Data Sheet

Project List