Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
AFI-8 Black Passive Loudspeaker with Mounting Frame
Model: 106-0806
- Driver Complement: Low-Frequency: One Apogee 15 inch (381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 3 inch (76mm) voice coil, 2 inch(51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short term impedance rise
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/- 8WB Modules) or DLC24
Product Info
Tech Specs
Documents
The AFI-8 is a fully arrayable loudspeaker capable of filling large churches, theaters, sports venues, and theme parks with clean, articulate full bandwidth sound. Available with a 60° x 40° or 90° x 40° high-frequency horn pattern insuring that the AFI-8 works flawlessly in any room configuration. A bi-amplified version is also available.
- Driver Complement: Low-Frequency: One Apogee 15 inch (381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 3 inch (76mm) voice coil, 2 inch(51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short term impedance rise
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/- 8WB Modules) or DLC24
- Recommended Crossover (AFI-8B only): Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts) Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
- Options/Accessories: AFI Controller Processor or DLC24 Digital Processor; SX weather treatment for use in limited exposure enclosures ; assorted rigging components
- Loudspeaker Setup - Rigged
- Powered (Active) - Yes
- Spec Sheet available - Yes
- Depth: 15.10 in
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Format: Passive/Two-way
- Height: 30.25 in
- Impedance: 8 ohm
- Input Connectors: Barrier strip, screw type #8
- Sensitivity: 99 dB
- Width: 20.25 in
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
- Maximum SPL (Sound Pressure Level): 125 dB
- Cabinet Construction: Multi-ply hardwood
- Product Weight: 77 lbs
- Coverage Horizontal: 60 degrees
- Coverage Vertical: 40 degrees
- Color: Black
- Construction: Hardwood
- Minimum Frequency Response (Bandwidth): 46 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Finish: Textured
- Speaker Diameter (Driver): 15 in
- Power Handling (High Frequency): 1600 Watt
- Power Handling (Low Frequency): 400 Watt
- Compatible Processors: AFI Main Frame Controller Chassis (using AFI-4 Module) or DLC24
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- PTML (peak transient mechanical limit): 141 dB
Loudspeaker
433150 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Delaware Audio Visual
close
Delaware Audio Visual
38 Reads Way
New Castle, DL 19720
USA
(302) 655-1600
https://delawareav.com
Contact in regards to this product:
Bogen Communications, Inc.
Model: 106-0806
Request more information from a dealer near you
close
Request more information from a dealer near you