Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
AFI-4 Loudspeaker
Series: Contractor
Model: 106-0400
- Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
Product Info
Tech Specs
Documents
The AFI-4 is a fully arrayable loudspeaker versatile enough for clubs, discos, churches, theaters, and theme parks. Much of this versatility comes from the available options that include a 60° x 45° or 90° x 45° horn as well as bi-amplification capabilities. These horns, as well as their logo plate, are rotatable to allow alternative hanging positions.
- Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24
- Recommended Crossover (AFI-4B only): Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware:Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
- Options/Accessories: AFI Controller Processor or DLC24 Digital Processor; SX weather treatment for use in limited exposure enclosures; assorted rigging components
- Loudspeaker Setup - Rigged
- Powered (Active) - Yes
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 12 in
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 58 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Construction: Hardwood
- Coverage Horizontal: 60 degrees
- Coverage Vertical: 45 degrees
- Finish: Textured
- Impedance: 8 ohm
- Maximum SPL (Sound Pressure Level): 130 dB
- Power Handling (High Frequency): 1200 Watt
- Power Handling (Low Frequency): 300 Watt
- Sensitivity: 99 dB
- Depth: 12.10 in
- Height: 28.20 in
- Width: 15.30 in
- Product Weight: 53 lbs
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Format: Passive/Two-way
- Input Connectors: Barrier strip, screw type #8
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
- Cabinet Construction: Multi-ply hardwood
- Compatible Processors: AFI Main Frame Controller Chassis (using AFI-4 Module) or DLC24
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- PTML (peak transient mechanical limit): 138 dB
Loudspeaker
452673 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Delaware Audio Visual
close

Delaware Audio Visual
38 Reads Way
New Castle, DL 19720
USA
(302) 655-1600
https://delawareav.com
Contact in regards to this product:
Bogen Communications, Inc.
Model: 106-0400
Request more information from a dealer near you
close
Request more information from a dealer near you