Signal Processing Systems : AV Input / Output Boards & Cards : Kramer - DTAxrD2P-OUT2-F34

2-Channel 4K HDR HDMI over HDBaseT 2.0 DSC Output Card with Analog Audio and PoE Provider

Model: DTAxrD2P-OUT2-F34

Max. Data Rate - 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable.
Max. Resolution - 4K at 60Hz (4:4:4).
PoE Provider - Provides power over Ethernet to connected devices.
Analog Audio Embedding/De-embedding or ARC - On the same jack.
HDBaseT Technology - HDTV compatible, HDCP 2.2/1.4 compliant.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

DTAxrD2P-OUT2-F34 is a two-channel, 4K at 60Hz (4:4:4), DSC, HDMI, analog audio, bidirectional RS-232, Ethernet, and IR over HDBaseT twisted pair transmitter card for compatible Kramer Modular Multi-Format Digital Matrix Switchers. DTAxrD2P-OUT2-F34 outputs two extended-reach HDBaseT signals with selectable embedded/de-embedded analog audio, bidirectional RS-232, IR, and Ethernet from the chassis to the line.

Max. Data Rate - 18Gbps (6Gbps per graphics channel), 10Gbps DSC over CAT cable.
Max. Resolution - 4K at 60Hz (4:4:4).
PoE Provider - Provides power over Ethernet to connected devices.
Analog Audio Embedding/De-embedding or ARC - On the same jack.
HDBaseT Technology - HDTV compatible, HDCP 2.2/1.4 compliant.
System Range - Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p at 60Hz at 24bpp). Note: When using Kramer HDBaseT cables.
Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
Bidirectional RS-232 Extension: - Serial interface data flows in both directions, allowing data transmission and device control.
Bidirectional Infrared Extension: - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
3D Pass-Through.
PoE (Power over Ethernet) Enabled - Provides PoE power to a connected device with the Kramer PoE Power Supply Add-On PS-4812 (sold separately).

Input/Output Board/Card Type - Audio
Input/Output Board/Card Type - Video
ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE, WEEE
Active Power: 21.50 Watt
Inputs: 2 HDBaseT: On RJ-45 connectors
Ports: 2 Unbalanced Audio: On a 6-pin terminal block connector, 2 RS-232: On a 6-pin terminal block connector, 2 IR: On a 4-pin terminal block, 1 Ethernet: On an RJ-45 connector
EXTENSION LINE: Compression: Low-level standard DSC compression for signals above 4K at 60 (4:2:0), 4K at 60 (4:4:4) Range with Compression: Up to 100m (330ft), 4K at 60 (42:0) Range with No Compression: Up to 100m (330ft), Full HD (1080p at 60Hz) Range with No Compression: Up to 130m (430ft), Full HD (1080p at 60Hz) Range in Ultra-Long Mode: Up to 180m (590ft), Compliance: HDBaseT 2.0
Video: Max Bandwidth with Compression: 17.95Gbps (5.98Gbps per graphic channel), Max Bandwidth with No Compression: 10.2Gbps (3.4Gbps per graphic channel), Max Resolution with Compression: 3840x2160 at 60Hz 4:4:4 24bpp, Max Resolution with No Compression: 4096x2160 at 60Hz 4:2:0 24bpp, Compliance: HDCP 2.2, HDR 10
Extended Ethernet: Bandwidth: Up to 100Mbps, EXTENDED RS-232, Baud Rate: 300 to 115200
Storage Temperature: -40° to +70°C (-40° to 158°F)
Humidity: 10% to 90%, RHL non-condensing

Output Card 112135 kb - Data Sheet

Project List

Suggested Products

4-Channel Graphics Card with HDMI 2.0 Outputs

by Datapath Ltd.

8-slot 2RU DigitalMedia Card Chassis for DM-NVX-C and DMCF Cards

by Crestron Electronics, Inc.

4 Channel DVI/ RGB/ HD Capture Card Plus 2 DVI Splitter Cables

by Datapath Ltd.