Control Systems : Related Control Systems Products : Gilderfluke & Company, Inc. - PB-DMX

PB-DMX Relays and Controller

Model: PB-DMX

Part #: PB-DMX/0

Plugs onto a Grayhill 8, 16, 24, or 32 position ‘G5’ relay mounting boards
Accepts standard DMX-512 data. Address is set through serial port
Programming and operation are identical to a Br-miniBrick8, but with 32 outputs
Automatic ‘program in place’ download through the RS-232 serial port on your PC and the included PC•MACs software. It takes about thirty seconds to download a ten minute show
‘Test’ button allows outputs to be manually turned on one at a time

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

The PB-DMX is a show controller for 8, 16, 24 or 32 3.5 amp AC/DC relay outputs. The newly expanded 4 MByte flash memory holds approximately 9 hours of shows. DMX-512 in/out and optoisolated trigger inputs are standard. The DMX-512 can easily be used to network together PB-DMXs for thousands of outputs.

Plugs onto a Grayhill 8, 16, 24, or 32 position ‘G5’ relay mounting boards
Accepts standard DMX-512 data. Address is set through serial port
Programming and operation are identical to a Br-miniBrick8, but with 32 outputs
Automatic ‘program in place’ download through the RS-232 serial port on your PC and the included PC•MACs software. It takes about thirty seconds to download a ten minute show
‘Test’ button allows outputs to be manually turned on one at a time
Two optoisolated inputs are used to trigger from push buttons, motion sensors, or any other type of switch
AC and DC relay output modules are available. Typical current capacity is 3.5 amps each. You can freely mix both AC and DC relay output modules on any PB-nn mounting board