Control Systems : Related Control Systems Products : Alcorn McBride Inc. - LightCue with Ethernet

DMX Recorder with Ethernet Control

Model: LightCue with Ethernet

Ethernet Control
Records output of any lighting board
Can "pile-on" up to 40 simultaneous cues
Switch between 'live" DMX input and recorder, material
Standalone or controller driven operation

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The all-new LightCue takes the features of our LightCue Pro multi-universe DMX recorder/player and brings it to the single DMX universe.

LightCue is designed to replace bulky and expensive lighting consoles in permanent installations. Simply use your favorite lighting console to program your lighting as you would normally. Then, record the DMX output of your console into the LightCue. Take the console away and you are ready to go!

The new LightCue can be controlled via Ethernet, RS-232, SMPTE timecode, contact closure/voltage inputs, cue lists or the real-time scheduler (including sunrise/sunset). You can even pile-on up to 40 cues (HTP or LTP) at one time for complex shows/rides. With no moving parts, the LightCue will run for years without any maintenance.

Ethernet Control
Records output of any lighting board
Can "pile-on" up to 40 simultaneous cues
Switch between 'live" DMX input and recorder, material
Standalone or controller driven operation
Jam syncs to SMPTE incoming timecode
Stores up to 100 hours of DMX data
APPLICATIONS
- Dark Rides
- Stage Shows
- 4D Movies
- Architectural Lighting

ROHS Compliant - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 100.40 F
Operating Temperature (Minimum): 32 F
Certifications: CE, UL
AC Voltage (Maximum): 250 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 20 Watt
Depth: 10.60 in
Height: 3.50 in
Width: 19 in
Product Weight: 17 lbs
Regulatory Compliance: WEEE
DMX:
- Input/Output: (1) Male 5-Pin XLR / (1) Female 5-Pin XLR
- Signal: Fully DMX-512/1990 Compliant
- Recorded Channels: 512
- Playback Time: At least 100 hours (with every channel changing 30 times per second)
Control Interface:
- Serial Control: RS-232C at 9600 baud, n, 8, 1
- Ethernet
  - 100 Base-T, UDP control
  - HTTP
  - FTP File Transfer
- USB: USB 2.0 Control
- Parallel Opto Inputs: Programmable: Play any cue, Still, Stop, Record, Pile-on, Feedthrough, and Loop
- Parallel Contact Outputs: (1) Running, (1) Fault
- SMPTE Inputs: Female 3-Pin XLR, transfer coupled 600 ohm
- Real Time Clock: Battery Backed-up, NTP with Ethernet
Front Panel:
- Pushbuttons: 8 Fully Programmable (same as inputs)
- Knob: Menu Selection, Record, Play, Still, Stop and Set Up
- Indicators: SMPTE Lock, Power
- VFD Display: Two lines, 16 characters per line
- CF Socket: Front accessible, security cover plate